Please Whitelist This Site? I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :) If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads. If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK. Thanks for your understanding! Sincerely, Charles Kozierok Author and Publisher, The TCP/IP Guide

NOTE: Using software to mass-download the site degrades the server and is prohibited. If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The TCP/IP Guide  9  Networking Fundamentals       9  Fundamental Network Characteristics

Circuit Switching and Packet Switching Networks 1 2 3 Messages: Packets, Frames, Datagrams and Cells

Connection-Oriented and Connectionless Protocols in TCP/IP

Looking again at TCP/IP, it has two main protocols that operate at the transport layer of the OSI Reference Model. One is the Transmission Control Protocol (TCP), which is connection-oriented; the other, the User Datagram Protocol (UDP), is connectionless. TCP is used for applications that require the establishment of connections (as well as TCP’s other service features), such as FTP; it works using a set of rules, as described earlier, by which a logical connection is negotiated prior to sending data. UDP is used by other applications that don't need connections or other features, but do need the faster performance that UDP can offer by not needing to make such connections before sending data.

Some people consider this to be like a “simulation” of circuit-switching at higher network layers; this is perhaps a bit of a dubious analogy. Even though a TCP connection can be used to send data back and forth between devices, all that data is indeed still being sent as packets; there is no real circuit between the devices. This means that TCP must deal with all the potential pitfalls of packet-switched communication, such as the potential for data loss or receipt of data pieces in the incorrect order. Certainly, the existence of connection-oriented protocols like TCP doesn't obviate the need for circuit switching technologies, though you will get some arguments about that one too. J

The principle of layering also means that there are other ways that connection-oriented and connectionless protocols can be combined at different levels of an internetwork. Just as a connection-oriented protocol can be implemented over an inherently connectionless protocol, the reverse is also true: a connectionless protocol can be implemented over a connection-oriented protocol at a lower level. In a preceding example, I talked about Telnet (which requires a connection) running over IP (which is connectionless). In turn, IP can run over a connection-oriented protocol like ATM.

Circuit Switching and Packet Switching Networks 1 2 3 Messages: Packets, Frames, Datagrams and Cells