Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Get The TCP/IP Guide for your own computer.
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Internet Layer (OSI Network Layer) Protocols
           9  Internet Protocol (IP/IPv4, IPng/IPv6) and IP-Related Protocols (IP NAT, IPSec, Mobile IP)
                9  Internet Protocol Version 4 (IP, IPv4)
                     9  IP Addressing
                          9  IP Subnetting: Practical Subnet Design and Address Determination Example

Previous Topic/Section
IP Subnetting Step #3: Determining The Custom Subnet Mask
Previous Page
Pages in Current Topic/Section
1234
5
Next Page
IP Subnetting Step #5: Determining Host Addresses For Each Subnet
Next Topic/Section

IP Subnetting Step #4: Determining Subnet Identifiers and Subnet Addresses
(Page 5 of 5)

Subnet Formula Calculations With More Than 8 Subnet Bits

When the number of subnet bits is greater than 8, some of the octets are of the form “N divided by an integer”, such as “N/8”. This is an integer division, which means “divide N by 8, keep the integer part and drop the fractional part or remainder”. Other octets are calculated based on the modulo of N, shown as “N%8”. This is the exact opposite: it means, “divide N by 8, drop the integer and keep the remainder”. For example, 33/5 in integer math is 6 (6 with a remainder of 3, drop the remainder, or alternately, 6.6, drop the fraction). 33%5 is 3 (6 with a remainder of 3, drop the 6, keep the remainder).

Let's take as an example our Class B network and suppose that for some strange reason we decided to use 10 bits for the subnet ID instead of 5. In this case, the formula is “x.y.N/4.(N%4)*64”. Subnet #23 in this case would have the address “166.113.23/4.(23%4)*64. The 23/4 becomes just 5 (the fractional.75 is dropped). 23 modulo 4 is 3, which is multiplied by 64 to get 192. So the subnet address is “166.113.5.192”. Subnet #709 would be “116.113.709/4.(709%4)*64, which is 116.113.177.64.

Subnet Formula Calculations With More Than 16 Subnet Bits

Okay, now for the real fun. If you subnet a Class A address using more than 16 bits for the subnet ID, you are crossing two octet boundaries, and the formulas become very … interesting, involving both integer division and modulo. Suppose we were in charge of Class A address 21.0.0.0 and choose to subnet it. However, we sat down to do this after having had a few stiff ones at the office holiday party, so our judgment is a bit impaired. We decide that it would be a great idea to choose 21 bits for our subnet ID, since we like the number 21. This gives us a couple million subnets.

The formula for subnet addresses in this case, is “x.N/8192.(N/32)%256.(N%32)*8”. Yikes. Well, this is a bit involved—so much so that it might be easier to just take a subnet number and do it in binary, the long way. But let's take an example and see how it works, for, say, subnet #987654. The first octet is of course 21. The second octet is 987654/8192, integer division. This is 120. The third octet is (987654/32)%256. The result of the division is 30864 (we drop the fraction). Then, we take 30864%256, which yields a remainder of 144. The fourth octet is (987654%32)*8. This is 6*8 or 48. So subnet address #987654 is 21.120.144.48.

(Don't drink and drive. Don't drink and subnet either. J)


Previous Topic/Section
IP Subnetting Step #3: Determining The Custom Subnet Mask
Previous Page
Pages in Current Topic/Section
1234
5
Next Page
IP Subnetting Step #5: Determining Host Addresses For Each Subnet
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.