Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

The whole site in one document for easy reference!
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Internet Layer (OSI Network Layer) Protocols
           9  Internet Protocol (IP/IPv4, IPng/IPv6) and IP-Related Protocols (IP NAT, IPSec, Mobile IP)
                9  Internet Protocol Version 6 (IPv6) / IP Next Generation (IPng)
                     9  IPv6 Addressing

Previous Topic/Section
IPv6 Interface Identifiers and Physical Address Mapping
Previous Page
Pages in Current Topic/Section
12
3
Next Page
IPv6/IPv4 Address Embedding
Next Topic/Section

IPv6 Special Addresses: Reserved, Private (Link-Local / Site-Local), Unspecified and Loopback
(Page 3 of 3)

IPv6 Private Addresses Types/Scopes

Now, let's take a bit more of a look at private addresses. In IPv6, these are called local-use addresses, the name conveying clearly what they are for. They are also sometimes called link-layer addresses. Recall that IPv4 private addresses were commonly used when public addresses could not be obtained for all devices, sometimes in combination with technologies like Network Address Translation (NAT). In IPv6, trickery like NAT isn't required. Instead, local-use addresses are intended for communication that is inherently designed only to be sent to local devices. For example, neighbor discovery functions using the IPv6 Neighbor Discovery (ND) protocol employ local-use addresses.

The scope of local addresses is obviously a local network, and not the global scope of public Internet addresses. Local addresses in IPv6 are divided further into two types, reflecting a further division of local scope.

Site-Local Addresses

These addresses have the scope of an entire site, or organization. They allow addressing within an organization without need for using a public prefix. Routers will forward datagrams using site-local addresses within the site, but not outside it to the public Internet.

Site-local addresses are differentiated from link-local addresses by having a tenth bit of “1” following the nine starting address bits common to all private IPv6 addresses. Thus, they begin with “1111 1110 11”. In hexadecimal, site-local addresses begin with “FE” and then “C” to “F” for the third hex digit. So, these addresses start with “FEC”, “FED”, “FEE” or “FEF”.

Link-Local Addresses

These addresses have a smaller scope than site-local addresses; they refer only to a particular physical link (physical network). Routers will not forward datagrams using link-local addresses at all, not even within the organization; they are only for local communication on a particular physical network segment. They can be used for address configuration or for the ND functions such as address resolution and neighbor discovery.

Link-local addresses are differentiated from site-local addresses by having a tenth bit of “0” following the nine initial address bits common to all private IPv6 addresses: “1111 1110 1”. Thus, site-local addresses begin with “FE” and then “8” to “B” for the third hex digit. So, these addresses start with “FE8”, “FE9”, “FEA” or “FEB”.

Key Concept: IPv6 site-local addresses allow data to be sent only to the devices within a site or organization. They begin with “FEC”, “FED”, “FEE” or “FEF” in hexadecimal. IPv6 link-local addresses are used only on a particular local link (physical network), typically for special purposes such as address resolution or neighbor discover. They start with “FE8”, “FE9”, “FEA” or “FEB”.


Note that site-local IPv6 addresses are the equivalent of IPv4 private addresses, since they are routed throughout the organization. The concept of link-local scope is new to IPv6.


Previous Topic/Section
IPv6 Interface Identifiers and Physical Address Mapping
Previous Page
Pages in Current Topic/Section
12
3
Next Page
IPv6/IPv4 Address Embedding
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.