Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Read offline with no ads or diagram watermarks!
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  Networking Fundamentals
      9  Fundamental Network Characteristics

Previous Topic/Section
Connection-Oriented and Connectionless Protocols
Previous Page
Pages in Current Topic/Section
1
2
Next Page
Message Formatting: Headers, Payloads and Footers
Next Topic/Section

Messages: Packets, Frames, Datagrams and Cells
(Page 2 of 2)

Common Names For Messages

The most common terms that are used for messages are the following:

  • Packet: This term is considered by many to most correctly refer to a message sent by protocols operating at the network layer of the OSI Reference Model. So, you will commonly see people refer to “IP packets”. However, this term is commonly also used to refer generically to any type of message, as I mentioned at the start of this topic.

  • Datagram: This term is basically synonymous with “packet” and is also used to refer to network layer technologies. It is also often used to refer to a message that is sent at a higher level of the OSI Reference Model (more often than “packet” is).

  • Frame: This term is most commonly associated with messages that travel at low levels of the OSI Reference Model. In particular, it is most commonly seen used in reference to data link layer messages. It is occasionally also used to refer to physical layer messages, when message formatting is performed by a layer one technology. A frame gets its name from the fact that it is created by taking higher-level packets or datagrams and “framing” them with additional header information needed at the lower level.

  • Cell: Frames and packets, in general, can be of variable length, depending on their contents; in contrast, a cell is most often a message that is fixed in size. For example, the fixed-length, 53-byte messages sent in Asynchronous Transfer Mode (ATM) are called cells. Like frames, cells usually are used by technologies operating at the lower layers of the OSI model.

  • Protocol Data Unit (PDU) and Service Data Unit (SDU): These are the formal terms used in the OSI Reference to describe protocol messages. A PDU at layer N is a message sent between protocols at layer N. It consists of layer N header information and an encapsulated message from layer N+1, which is called both the layer N SDU and the layer N+1 PDU. After you stop scratching your head, see the topic on OSI model data encapsulation for a discussion of this that may actually make sense. J

I should also point out that there are certain protocols that use unusual names to refer to their messages, which aren’t used elsewhere in the world of networking. One prominent example is the Transmission Control Protocol (TCP), which calls its messages segments.

Key Concept: Communication between devices on packet-switched networks is based on in items most generically called messages. These pieces of information also go by other names such as packets, datagrams, frames and cells, which often correspond to protocols at particular layers of the OSI Reference Model. The formal OSI terms for messages are protocol data unit (PDU) and service data unit (SDU).


Message Terminology in this Guide

As for this Guide and its use of these terms, I have made a specific effort not to imply anything about the nature of a message solely based on the name it uses, but I do try to follow the most common name used for a particular technology. For example, messages sent over Ethernet are almost always called Ethernet frames—they are not generally called Ethernet datagrams, for example. However, I do not structure discussions so that the type of name used for a message is the only way to determine what sort of message it is.


Previous Topic/Section
Connection-Oriented and Connectionless Protocols
Previous Page
Pages in Current Topic/Section
1
2
Next Page
Message Formatting: Headers, Payloads and Footers
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.