Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Searchable, convenient, complete TCP/IP information.
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Network Interface Layer (OSI Data Link Layer) Protocols
           9  TCP/IP Serial Line Internet Protocol (SLIP) and Point-to-Point Protocol (PPP)
                9  Point-to-Point Protocol (PPP)
                     9  PPP Feature Protocols

Previous Topic/Section
PPP Multilink Protocol (MP/MLP/MLPPP)
Previous Page
Pages in Current Topic/Section
1
2
Next Page
PPP Protocol Frame Formats
Next Topic/Section

PPP Bandwidth Allocation Protocol (BAP) and Bandwidth Allocation Control Protocol (BACP)
(Page 1 of 2)

The PPP Multilink Protocol (MP) described in the previous topic allows multiple links between a pair of devices, whether physical or in the form of virtual channels, to be combined into a “fat pipe” (high-capacity channel). This offers tremendous advantages to many PPP users, as it lets them make optimal use of all their bandwidth, especially for applications such as Internet connectivity. It's no surprise, then, that MP has become one of the most popular features of PPP.

The original standard defining MP basically assumed that multiple links would be combined into a single bundle. For example, if you had two modem links they would both be connected and then combined, or two B channels in an ISDN link would be combined. After MP was set up the bundle would be available for either device to use in its entirety.

There's one drawback to this system: the “fat pipe” is always enabled, and in many cases, it is expensive to have this set up all the time. It often costs more to connect two or more layer one links than a single one, and it's not always needed. For example, some ISDN services charge per minute for calls on either of the B channels. In the case of modem dialup there are per-minute charges in some parts of the world. Even where regular phone calls are “free”, there is a cost in the form of tying up a phone line. Consider that in many applications, the amount of bandwidth needed varies over time.

It would be better if we could set up MP so that it could dynamically add links to the bundle when needed, such as when we decided to download some large files, and then automatically drop them when no longer required. This enhancement to the basic MP package was provided in the form of a pair of new protocols described in RFC 2125:

  • Bandwidth Allocation Protocol (BAP): Describes a mechanism where either device communicating over an MP bundle of layer one links may request that a link be added to the bundle or removed from it.

  • Bandwidth Allocation Control Protocol (BACP): Allows devices to configure how they want to use BAP.

Key Concept: BAP and BACP are used to provide dynamic control over how the PPP Multilink Protocol functions.



Previous Topic/Section
PPP Multilink Protocol (MP/MLP/MLPPP)
Previous Page
Pages in Current Topic/Section
1
2
Next Page
PPP Protocol Frame Formats
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.