Please Whitelist This Site?

I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :)

If you like The TCP/IP Guide, please consider the download version. It's priced very economically and you can read all of it in a convenient format without ads.

If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK.

Thanks for your understanding!

Sincerely, Charles Kozierok
Author and Publisher, The TCP/IP Guide


NOTE: Using software to mass-download the site degrades the server and is prohibited.
If you want to read The TCP/IP Guide offline, please consider licensing it. Thank you.

The Book is Here... and Now On Sale!

Get The TCP/IP Guide for your own computer.
The TCP/IP Guide

Custom Search







Table Of Contents  The TCP/IP Guide
 9  TCP/IP Lower-Layer (Interface, Internet and Transport) Protocols (OSI Layers 2, 3 and 4)
      9  TCP/IP Network Interface Layer (OSI Data Link Layer) Protocols
           9  TCP/IP Serial Line Internet Protocol (SLIP) and Point-to-Point Protocol (PPP)
                9  Point-to-Point Protocol (PPP)
                     9  PPP Feature Protocols

Previous Topic/Section
PPP Link Quality Monitoring/Reporting (LQM/LQR)
Previous Page
Pages in Current Topic/Section
1
2
34
Next Page
PPP Encryption Control Protocol (ECP) and Encryption Algorithms
Next Topic/Section

PPP Compression Control Protocol (CCP) and Compression Algorithms
(Page 2 of 4)

CCP Operation: Compression Setup

When most people talk about compression in PPP they mention CCP, which is considered “the” compression protocol for PPP. However, CCP is actually used only to configure and control the use of compression; it is the algorithms that do the real work of compressing and decompressing. This “separation of powers” provides flexibility, since it allows each implementation to choose what type of compression they wish to use.

CCP is analogous to the Network Control Protocols (NCPs) that negotiate parameters specific to a network layer protocol sent on the link. An NCP lets two devices decide how they will carry layer three traffic, such as how IPCP lets the devices determine how to carry IP. CCP lets two devices decide how they will compress data, in the same basic way.

Similarly, just as each NCP is like a “lite” version of LCP, CCP is also like a “lite” version of LCP. It is used to set up a compression connection called a CCP link within an LCP link between two devices. Once established, compressed frames can be sent between the two devices. CCP also provides messaging capabilities for managing and eventually terminating a CCP link, again very similar to how each network layer protocol sets up a NCP link within LCP. A CCP link is maintained independently of any NCP links.

CCP uses the same subset of seven LCP message types that the NCPs use, and adds two additional ones. The use of these messages for each of the “life stages” of a CCP link is as follows, which should look very familiar if you've already read about how the NCPs and LCP itself work:

  • Link Configuration: Like the NCPs, compression configuration is done once CCP reaches the Network-Layer Protocol phase. The process of setting up compression and negotiating parameters is accomplished using Configure-Request, Configure-Ack, Configure-Nak and Configure-Reject messages just as described in the LCP topic, except the configuration options are particular to CCP.

  • Link Maintenance: Code-Reject messages can be sent to indicate invalid code values in CCP frames. The two new message types are Reset-Request and Reset-Ack, which are used to reset the compression (the CCP link) in the event of a detected failure in decompression.

  • Link Termination: A CCP link can be terminated using Terminate-Request and Terminate-Ack. Again, remember that like the NCP links, the CCP link is set up within an LCP link, and closing it doesn't terminate the LCP link which controls PPP overall.

Previous Topic/Section
PPP Link Quality Monitoring/Reporting (LQM/LQR)
Previous Page
Pages in Current Topic/Section
1
2
34
Next Page
PPP Encryption Control Protocol (ECP) and Encryption Algorithms
Next Topic/Section

If you find The TCP/IP Guide useful, please consider making a small Paypal donation to help the site, using one of the buttons below. You can also donate a custom amount using the far right button (not less than $1 please, or PayPal gets most/all of your money!) In lieu of a larger donation, you may wish to consider purchasing a download license of The TCP/IP Guide. Thanks for your support!
Donate $2
Donate $5
Donate $10
Donate $20
Donate $30
Donate: $



Home - Table Of Contents - Contact Us

The TCP/IP Guide (http://www.TCPIPGuide.com)
Version 3.0 - Version Date: September 20, 2005

© Copyright 2001-2005 Charles M. Kozierok. All Rights Reserved.
Not responsible for any loss resulting from the use of this site.